PRODUCTS



Home > Basins, Grates & Emitters
Choose a sub category:
Atrium Grates Brass & Chrome Grates
Retaining Wall Drains Catch Basin Kits
Decorative Grates Duracast Grates
Emitters Iron Age Design Grates
Macon Plastics Surface Drains Mitered Drains
Tuf-Tite Boxes Round Grates for Pipe
Round Spee-D Basins & Grates Square Catch Basins & Grates
Square Grates for Pipe
Sort By:
Page of 14
10" Aluminum Dome Grate 10" Aluminum Flat Grate 10" Aluminum Low Cone Grate
Our Price: $65.57
more info
Our Price: $57.26

(1)
more info
Our Price: $59.78
more info
10" Aluminum Dome Grate 10" Aluminum Flat Grate 10" Aluminum Low Cone Grate
Aluminum Domes offer the same reliability found in cast iron domes but with the light-weight construction of aluminum.

Available sizes 6"-12"

Pedestrian Traffic ONLY
Flat Grates are designed to provide both a high volume water capacity and a flush finish. One-piece aluminum construction makes the Flat Grate light-weight and cost efficient. Castings are designed to fit inside standard drainage tile.

Available sizes 4"-24"

Pedestrian Traffic ONLY
Low Cones are a one piece aluminum construction and are used where sufficient free opening is necessary for adequate and insured storm or field drainage. Castings are made to fit inside standard drainage tile inlets.

Available sizes 4"-24"

Pedestrian Traffic ONLY
10" Aluminum Solid Cover 10" Aluminum Surface Inlet Grate 12" Aluminum Dome Grate
Our Price: $60.94
more info
Our Price: $47.89
more info
Our Price: $82.56

(1)
more info
10" Aluminum Solid Cover 10" Aluminum Surface Inlet Grate 12" Aluminum Dome Grate
Utility Covers are designed to eliminate dangerous and unsightly sewer and access pipes. Utility Covers can be flush mount directly to the access pipe or ground pit .

Available sizes 6"-24"

Pedestrian Traffic ONLY
Surface Inlets are designed for a flush finish for your convenience. Typical applications include garage drains, parking lots, or anywhere surface drainage is necessary. Castings are made to fit inside standard drainage tile.

Available sizes 4"-24"

Pedestrian Traffic ONLY
Aluminum Domes offer the same reliability found in cast iron domes but with the light-weight construction of aluminum.

Available sizes 6"-12"

Pedestrian Traffic ONLY
12" Aluminum Flat Grate 12" Aluminum Low Cone Grate 12" Aluminum Solid Cover
Our Price: $76.30
more info
Our Price: $78.22

(1)
more info
Our Price: $83.82
more info
12" Aluminum Flat Grate 12" Aluminum Low Cone Grate 12" Aluminum Solid Cover
Flat Grates are designed to provide both a high volume water capacity and a flush finish. One-piece aluminum construction makes the Flat Grate light-weight and cost efficient. Castings are designed to fit inside standard drainage tile.

Available sizes 4"-24"

Pedestrian Traffic ONLY
Low Cones are a one piece aluminum construction and are used where sufficient free opening is necessary for adequate and insured storm or field drainage. Castings are made to fit inside standard drainage tile inlets.

Available sizes 4"-24"

Pedestrian Traffic ONLY
Utility Covers are designed to eliminate dangerous and unsightly sewer and access pipes. Utility Covers can be flush mount directly to the access pipe or ground pit .

Available sizes 6"-24"

Pedestrian Traffic ONLY
12" Aluminum Surface Inlet Grate 12" Catch Basin Kit w/ Cast Iron Decorative Bullseye Grate 12" Catch Basin Kit w/ Cast Iron Decorative Interlaken Grate
Our Price: $63.82
more info
Our Price: $169.99
more info
Our Price: $169.99
more info
12" Aluminum Surface Inlet Grate 12" Catch Basin Kit w/ Cast Iron Decorative Bullseye Grate 12" Catch Basin Kit w/ Cast Iron Decorative Interlaken Grate
Surface Inlets are designed for a flush finish for your convenience. Typical applications include garage drains, parking lots, or anywhere surface drainage is necessary. Castings are made to fit inside standard drainage tile.

Available sizes 4"-24"

Pedestrian Traffic ONLY
Ideal for yard / area drains to collect surface water while minimizing the amount of debris entering the system. Ideal for yard / area drains to collect surface water while minimizing the amount of debris entering the system.
12" Catch Basin Kit w/ Cast Iron Decorative Locust Grate 12" Catch Basin Kit w/ Cast Iron Decorative Oblio Grate 12" Catch Basin Kit w/ Cast Iron Decorative Sun Drain Grate
Our Price: $169.99
more info
Our Price: $169.99
more info
Our Price: $169.99
more info
12" Catch Basin Kit w/ Cast Iron Decorative Locust Grate 12" Catch Basin Kit w/ Cast Iron Decorative Oblio Grate 12" Catch Basin Kit w/ Cast Iron Decorative Sun Drain Grate
Ideal for yard / area drains to collect surface water while minimizing the amount of debris entering the system. Ideal for yard / area drains to collect surface water while minimizing the amount of debris entering the system. Ideal for yard / area drains to collect surface water while minimizing the amount of debris entering the system.
15" Aluminum Flat Grate 15" Aluminum Low Cone Grate 15" Aluminum Solid Cover
Our Price: $115.62
more info
Our Price: $118.16

(1)
more info
Our Price: $197.14
more info
15" Aluminum Flat Grate 15" Aluminum Low Cone Grate 15" Aluminum Solid Cover
Flat Grates are designed to provide both a high volume water capacity and a flush finish. One-piece aluminum construction makes the Flat Grate light-weight and cost efficient. Castings are designed to fit inside standard drainage tile.

Available sizes 4"-24"

Pedestrian Traffic ONLY
Low Cones are a one piece aluminum construction and are used where sufficient free opening is necessary for adequate and insured storm or field drainage. Castings are made to fit inside standard drainage tile inlets.

Available sizes 4"-24"

Pedestrian Traffic ONLY
Utility Covers are designed to eliminate dangerous and unsightly sewer and access pipes. Utility Covers can be flush mount directly to the access pipe or ground pit .

Available sizes 6"-24"

Pedestrian Traffic ONLY
15" Aluminum Surface Inlet Grate 18" Aluminum Flat Grate 18" Aluminum Low Cone Grate
Our Price: $113.62
more info
Our Price: $177.82
more info
Our Price: $170.26
more info
15" Aluminum Surface Inlet Grate 18" Aluminum Flat Grate 18" Aluminum Low Cone Grate
Surface Inlets are designed for a flush finish for your convenience. Typical applications include garage drains, parking lots, or anywhere surface drainage is necessary. Castings are made to fit inside standard drainage tile.

Available sizes 4"-24"

Pedestrian Traffic ONLY
Flat Grates are designed to provide both a high volume water capacity and a flush finish. One-piece aluminum construction makes the Flat Grate light-weight and cost efficient. Castings are designed to fit inside standard drainage tile.

Available sizes 4"-24"

Pedestrian Traffic ONLY
Low Cones are a one piece aluminum construction and are used where sufficient free opening is necessary for adequate and insured storm or field drainage. Castings are made to fit inside standard drainage tile inlets.

Available sizes 4"-24"

Pedestrian Traffic ONLY
18" Aluminum Solid Cover 18" Aluminum Surface Inlet Grate 18" Two Hole Catch Basin Kit w/ Cast Iron Interlaken Grate
Our Price: $298.51
more info
Our Price: $206.69
more info
Our Price: $588.75
more info
18" Aluminum Solid Cover 18" Aluminum Surface Inlet Grate 18" Two Hole Catch Basin Kit w/ Cast Iron Interlaken Grate
Utility Covers are designed to eliminate dangerous and unsightly sewer and access pipes. Utility Covers can be flush mount directly to the access pipe or ground pit .

Available sizes 6"-24"

Pedestrian Traffic ONLY
Surface Inlets are designed for a flush finish for your convenience. Typical applications include garage drains, parking lots, or anywhere surface drainage is necessary. Castings are made to fit inside standard drainage tile.

Available sizes 4"-24"

Pedestrian Traffic ONLY
Ideal for yard / area drains to collect surface water while minimizing the amount of debris entering the system.
24" Aluminum Flat Grate 24" Aluminum Low Cone Grate 24" Aluminum Solid Cover
Our Price: $280.99
more info
Our Price: $269.31
more info
Our Price: $370.70
more info
24" Aluminum Flat Grate 24" Aluminum Low Cone Grate 24" Aluminum Solid Cover
Flat Grates are designed to provide both a high volume water capacity and a flush finish. One-piece aluminum construction makes the Flat Grate light-weight and cost efficient. Castings are designed to fit inside standard drainage tile.

Available sizes 4"-24"

Pedestrian Traffic ONLY
Low Cones are a one piece aluminum construction and are used where sufficient free opening is necessary for adequate and insured storm or field drainage. Castings are made to fit inside standard drainage tile inlets.

Available sizes 4"-24"

Pedestrian Traffic ONLY
Utility Covers are designed to eliminate dangerous and unsightly sewer and access pipes. Utility Covers can be flush mount directly to the access pipe or ground pit .

Available sizes 6"-24"

Pedestrian Traffic ONLY
24" Aluminum Surface Inlet Grate 3" & 4" NDS Pop-Up Emitter Only (Green) 3" NDS Pop-Up Emitter with SDR35 Elbow (Green)
Our Price: $307.71
more info
Our Price: $12.54

(3)
more info
Our Price: $15.81

(1)
more info
24" Aluminum Surface Inlet Grate 3" & 4" NDS Pop-Up Emitter Only (Green) 3" NDS Pop-Up Emitter with SDR35 Elbow (Green)
Surface Inlets are designed for a flush finish for your convenience. Typical applications include garage drains, parking lots, or anywhere surface drainage is necessary. Castings are made to fit inside standard drainage tile.

Available sizes 4"-24"

Pedestrian Traffic ONLY
Allows water to be diverted and released to water-safe areas away from structures, erosion-prone landscapes and poor drainage areas.

Permits water captured by grates, catch basins, channel drains, Flo-Well, downspouts and roof gutter systems to flow through the drainage pipe and away from structural foundations to safe or useful areas. For example, water can be routed from a low area next to a foundation to a water safe area such as a curbside drainage system.

Opened by the hydrostatic pressure of water flowing through the drain pipe. As flow diminishes the Emitter closes again. The special patented design allows the Emitter to open with a negligible amount of pressure. Since the Emitter is closed during dry weather, debris and rodents cannot enter the drain pipes.
Allows water to be diverted and released to water-safe areas away from structures, erosion-prone landscapes and poor drainage areas.

Permits water captured by grates, catch basins, channel drains, Flo-Well, downspouts and roof gutter systems to flow through the drainage pipe and away from structural foundations to safe or useful areas. For example, water can be routed from a low area next to a foundation to a water safe area such as a curbside drainage system.

Opened by the hydrostatic pressure of water flowing through the drain pipe. As flow diminishes the Emitter closes again. The special patented design allows the Emitter to open with a negligible amount of pressure. Since the Emitter is closed during dry weather, debris and rodents cannot enter the drain pipes.