|
10" Aluminum Dome Grate
|
|
10" Aluminum Flat Grate
|
|
10" Aluminum Low Cone Grate
|
|
|
|
|
|
|
|
Aluminum Domes offer the same reliability found in cast iron domes but with the light-weight construction of aluminum.
Available sizes 6"-12"
|
Flat Grates are designed to provide both a high volume water capacity and a flush finish. One-piece aluminum construction makes the Flat Grate light-weight and cost efficient. Castings are designed to fit inside standard drainage tile.
Available sizes 4"-24"
|
Low Cones are a one piece aluminum construction and are used where sufficient free opening is necessary for adequate and insured storm or field drainage. Castings are made to fit inside standard drainage tile inlets.
Available sizes 4"-24"
|
|
|
|
10" Aluminum Solid Cover
|
|
10" Aluminum Surface Inlet Grate
|
|
12" Aluminum Dome Grate
|
|
|
|
|
|
|
|
Utility Covers are designed to eliminate dangerous and unsightly sewer and access pipes. Utility Covers can be flush mount directly to the access pipe or ground pit .
Available sizes 6"-24"
|
Surface Inlets are designed for a flush finish for your convenience. Typical applications include garage drains, parking lots, or anywhere surface drainage is necessary. Castings are made to fit inside standard drainage tile.
Available sizes 4"-24"
|
Aluminum Domes offer the same reliability found in cast iron domes but with the light-weight construction of aluminum.
Available sizes 6"-12"
|
|
|
|
12" Aluminum Flat Grate
|
|
12" Aluminum Low Cone Grate
|
|
12" Aluminum Solid Cover
|
|
|
|
|
|
|
|
|
Flat Grates are designed to provide both a high volume water capacity and a flush finish. One-piece aluminum construction makes the Flat Grate light-weight and cost efficient. Castings are designed to fit inside standard drainage tile.
Available sizes 4"-24"
|
Low Cones are a one piece aluminum construction and are used where sufficient free opening is necessary for adequate and insured storm or field drainage. Castings are made to fit inside standard drainage tile inlets.
Available sizes 4"-24"
|
Utility Covers are designed to eliminate dangerous and unsightly sewer and access pipes. Utility Covers can be flush mount directly to the access pipe or ground pit .
Available sizes 6"-24"
|
|
|
|
12" Aluminum Surface Inlet Grate
|
|
15" Aluminum Low Cone Grate
|
|
15" Aluminum Solid Cover
|
|
|
|
|
|
|
|
|
Surface Inlets are designed for a flush finish for your convenience. Typical applications include garage drains, parking lots, or anywhere surface drainage is necessary. Castings are made to fit inside standard drainage tile.
Available sizes 4"-24"
|
Low Cones are a one piece aluminum construction and are used where sufficient free opening is necessary for adequate and insured storm or field drainage. Castings are made to fit inside standard drainage tile inlets.
Available sizes 4"-24"
|
Utility Covers are designed to eliminate dangerous and unsightly sewer and access pipes. Utility Covers can be flush mount directly to the access pipe or ground pit .
Available sizes 6"-24"
|
|
|
|
15" Aluminum Surface Inlet Grate
|
|
18" Aluminum Flat Grate
|
|
18" Aluminum Low Cone Grate
|
|
|
|
|
|
|
|
|
Surface Inlets are designed for a flush finish for your convenience. Typical applications include garage drains, parking lots, or anywhere surface drainage is necessary. Castings are made to fit inside standard drainage tile.
Available sizes 4"-24"
|
Flat Grates are designed to provide both a high volume water capacity and a flush finish. One-piece aluminum construction makes the Flat Grate light-weight and cost efficient. Castings are designed to fit inside standard drainage tile.
Available sizes 4"-24"
|
Low Cones are a one piece aluminum construction and are used where sufficient free opening is necessary for adequate and insured storm or field drainage. Castings are made to fit inside standard drainage tile inlets.
Available sizes 4"-24"
|
|
|
|
18" Aluminum Solid Cover
|
|
18" Aluminum Surface Inlet Grate
|
|
24" Aluminum Flat Grate
|
|
|
|
|
|
|
|
|
Utility Covers are designed to eliminate dangerous and unsightly sewer and access pipes. Utility Covers can be flush mount directly to the access pipe or ground pit .
Available sizes 6"-24"
|
Surface Inlets are designed for a flush finish for your convenience. Typical applications include garage drains, parking lots, or anywhere surface drainage is necessary. Castings are made to fit inside standard drainage tile.
Available sizes 4"-24"
|
Flat Grates are designed to provide both a high volume water capacity and a flush finish. One-piece aluminum construction makes the Flat Grate light-weight and cost efficient. Castings are designed to fit inside standard drainage tile.
Available sizes 4"-24"
|
|
|
|
24" Aluminum Low Cone Grate
|
|
24" Aluminum Solid Cover
|
|
24" Aluminum Surface Inlet Grate
|
|
|
|
|
|
|
|
|
Low Cones are a one piece aluminum construction and are used where sufficient free opening is necessary for adequate and insured storm or field drainage. Castings are made to fit inside standard drainage tile inlets.
Available sizes 4"-24"
|
Utility Covers are designed to eliminate dangerous and unsightly sewer and access pipes. Utility Covers can be flush mount directly to the access pipe or ground pit .
Available sizes 6"-24"
|
Surface Inlets are designed for a flush finish for your convenience. Typical applications include garage drains, parking lots, or anywhere surface drainage is necessary. Castings are made to fit inside standard drainage tile.
Available sizes 4"-24"
|
|
|
|
3" Snap-In Drains with Stainless Steel Strainer
|
|
4" Aluminum Flat Grate
|
|
4" Aluminum Low Cone Grate
|
|
|
|
|
|
|
|
|
Drain fits inside pipe to allowing pipe to be cut flush with the floor level
|
Flat Grates are designed to provide both a high volume water capacity and a flush finish. One-piece aluminum construction makes the Flat Grate light-weight and cost efficient. Castings are designed to fit inside standard drainage tile.
Available sizes 4"-24"
|
Low Cones are a one piece aluminum construction and are used where sufficient free opening is necessary for adequate and insured storm or field drainage. Castings are made to fit inside standard drainage tile inlets.
Available sizes 4"-24"
|
|
|
|
4" Aluminum Surface Inlet Grate
|
|
4" PVC SDR35 Drain Grate (White) (Sp)
|
|
4" Snap-In Drains with Stainless Steel Strainer
|
|
|
|
|
|
|
|
|
Surface Inlets are designed for a flush finish for your convenience. Typical applications include garage drains, parking lots, or anywhere surface drainage is necessary. Castings are made to fit inside standard drainage tile.
Available sizes 4"-24"
|
Fits into SDR35 ASTM D3034 fittings
|
Drain fits inside pipe to allowing pipe to be cut flush with the floor level
|
|
|
|
6" Aluminum Dome Grate
|
|
6" Aluminum Flat Grate
|
|
6" Aluminum Low Cone Grate
|
|
|
|
|
|
|
|
Aluminum Domes offer the same reliability found in cast iron domes but with the light-weight construction of aluminum.
Available sizes 6"-12"
|
Flat Grates are designed to provide both a high volume water capacity and a flush finish. One-piece aluminum construction makes the Flat Grate light-weight and cost efficient. Castings are designed to fit inside standard drainage tile.
Available sizes 4"-24"
|
Low Cones are a one piece aluminum construction and are used where sufficient free opening is necessary for adequate and insured storm or field drainage. Castings are made to fit inside standard drainage tile inlets.
Available sizes 4"-24"
|
|
|
