|
10" Aluminum Backwater Flood Valve
|
|
12" Aluminum Backwater Flood Valve
|
|
4" Aluminum Backwater Flood Valve
|
|
|
|
|
|
|
|
Flood Valves are designed for backwater protection of drainage systems. Made to fit within the tile outlet, this cast aluminum valve has a minimum amount of resistance to outflowing water. The valve comes complete with stainless steel mounting bolts for a quick and affordable installation.
Available sizes 4"-12"
|
Flood Valves are designed for backwater protection of drainage systems. Made to fit within the tile outlet, this cast aluminum valve has a minimum amount of resistance to outflowing water. The valve comes complete with stainless steel mounting bolts for a quick and affordable installation.
Available sizes 4"-12"
|
Flood Valves are designed for backwater protection of drainage systems. Made to fit within the tile outlet, this cast aluminum valve has a minimum amount of resistance to outflowing water. The valve comes complete with stainless steel mounting bolts for a quick and affordable installation.
Available sizes 4"-12"
|
|
|
|
4" Sewer Disconnect Body ONLY (S x S)
|
|
4" Sewer Disconnect Plunger
|
|
6" Aluminum Backwater Flood Valve
|
|
|
|
|
|
|
|
|
Spears Sewer Disconnect functions as both cleanout and disconnect device, plus helps prevent sewage backup during hurricanes and floods. Complete unit consists of body and plunger (sold separately - both parts are required for proper use). The plunger can be screwed into the body to block solids waste flow. The plunger should be removed from the body and stored when not in use to prevent accidental closing (i.e., from ground vibration, etc.).
|
Spears Sewer Disconnect functions as both cleanout and disconnect device, plus helps prevent sewage backup during hurricanes and floods. Complete unit consists of body and plunger (sold separately - both parts are required for proper use). The plunger can be screwed into the body to block solids waste flow. The plunger should be removed from the body and stored when not in use to prevent accidental closing (i.e., from ground vibration, etc.).
|
Flood Valves are designed for backwater protection of drainage systems. Made to fit within the tile outlet, this cast aluminum valve has a minimum amount of resistance to outflowing water. The valve comes complete with stainless steel mounting bolts for a quick and affordable installation.
Available sizes 4"-12"
|
|
|
|
8" Aluminum Backwater Flood Valve
|
|
8" PVC DWV Fabricated Backwater Valve (S x S)
|
|
AY McDonald 1" Ball Style Curb Stop Valve (FPT x FPT)
|
|
|
|
|
|
|
|
|
Flood Valves are designed for backwater protection of drainage systems. Made to fit within the tile outlet, this cast aluminum valve has a minimum amount of resistance to outflowing water. The valve comes complete with stainless steel mounting bolts for a quick and affordable installation.
Available sizes 4"-12"
|
PVC Backwater Valves are designed to prevent fluids from re-entering drainage systems, should backflow occur. Unidirectional flow through the valve is created by a flap that freely opens during outflow, and is trapped closed if backflow occurs.
|
Female National Pipe Thread (FNPT) x Female National Pipe Thread (FNPT)
|
|
|
|
AY McDonald 3/4" Ball Style Curb Stop Valve (FPT x FPT)
|
|
Bull Run Valve 28" Key ONLY
|
|
Bull Run Valve REPAIR KIT
|
|
|
|
|
|
|
|
|
|
Female National Pipe Thread (FNPT) x Female National Pipe Thread (FNPT)
|
The Bull Run Valve Key is designed to turn valve from one opening to the other.
|
Used to repair a Bull Run Valve
|
|
|
|
Flap Gate 4" Standard
|
|
Flap Gate 6" Heavy Duty
|
|
Flap Gate 6" Standard
|
|
|
|
|
|
|
|
|
Use to keep damaging water out of drainage systems.
|
Use to keep damaging water out of drainage systems.
|
Use to keep damaging water out of drainage systems.
|
|
|
|
Flap Gate 8" for Corrugated Plastic Pipe
|
|
Flap Gate 8" Heavy Duty
|
|
Flap Gate 8" Standard
|
|
|
|
|
|
|
|
|
Use to keep damaging water out of drainage systems.
|
Use to keep damaging water out of drainage systems.
|
Use to keep damaging water out of drainage systems.
|
|
|
|
Flap Gate 10" for Corrugated Plastic Pipe
|
|
Flap Gate 10" Heavy Duty
|
|
Flap Gate 10" Standard
|
|
|
|
|
|
|
|
|
|
Use to keep damaging water out of drainage systems.
|
Use to keep damaging water out of drainage systems.
|
Use to keep damaging water out of drainage systems.
|
|
|
|
Flap Gate 12" for Corrugated Plastic Pipe
|
|
Flap Gate 12" Heavy Duty
|
|
Flap Gate 12" Standard
|
|
|
|
|
|
|
|
|
|
Use to keep damaging water out of drainage systems.
|
Use to keep damaging water out of drainage systems.
|
Use to keep damaging water out of drainage systems.
|
|
|
|
Flap Gate 15" for Corrugated Plastic Pipe
|
|
Flap Gate 15" Heavy Duty
|
|
Flap Gate 15" Standard
|
|
|
|
|
|
|
|
|
|
Use to keep damaging water out of drainage systems.
|
Use to keep damaging water out of drainage systems.
|
Use to keep damaging water out of drainage systems.
|
|
|
|
Flap Gate 18" for Corrugated Plastic Pipe
|
|
Flap Gate 18" Heavy Duty
|
|
Flap Gate 18" Standard
|
|
|
|
|
|
|
|
|
|
Use to keep damaging water out of drainage systems.
|
Use to keep damaging water out of drainage systems.
|
Use to keep damaging water out of drainage systems.
|
|
|
